The Global End Suction Pumps Market was valued at USD 1,831.8 Mn in 2020, and is projected to reach USD 2,306.2 Mn by 2028, expanding at a CAGR of 3.5% during the forecast period. An end suction pump is a centrifugal pump with a casing that has suction at one end and discharge at the other. These pumps are single-stage pumps with one impeller. The suction is axial and the discharge is at a 90-degree angle to the suction. Need for end suction pumps increases significantly as a result of growing industrial and infrastructure development around the world, as well as modernization of agriculture and wastewater treatment plants. A long coupled (separate coupling & motor) or close coupled (where the motor is in the same unit as the pump) end-suction centrifugal pump is referred to as a monobloc. The fundamental characteristic of the casing on big end-suction pumps is a twin volute, which reduces the forces acting on the impeller, motor, shaft, and bearings.
According to the World Health Organization (WHO), by 2026, half of the world's population is expected to live in water-stressed areas. As a result, water and wastewater treatment systems are projected to grow substantially in the future. As a result, demand for end suction pumps is expected to rise. The modular architecture of wastewater treatment plants lowered the initial large amount of investments, making them economical. As the capacity of wastewater flow and treatment plants grows, these systems are easily upgraded. Increasing worldwide population and high water demand across numerous industries are expected to encourage the construction of new water treatment plants around the world, allowing the water and wastewater sector to expand. As a result, demand for end suction pumps is expected to increase.
Industrial buyers are using modern pumping equipment instead of the conventional method of manufacturing for reducing maintenance and operational costs and saving energy, which is projected to boost the demand for end suction pumps during the forecast period. Another aspect that stimulates growth is technology developments, such as the invention of 3D printed impellers and the use of modelling software. These innovations help to improve pump performance, reduce production costs, and produce high flow rate and outlet pressure. These factors are expected to boost the end suction pump market.
Increasing number of construction industries leads to an increase in the need for end suction pumps for concrete and general water transfer on the job site, boosting the end suction pump market. Need for end suction pumps increased significantly as a result of growing industrial and infrastructure development around the world, as well as improvement of agriculture and wastewater treatment plants. The end suction pump market is growing, due to rapid industrialization and urbanization, as well as high demand for irrigation facilities from the agricultural sector in countries such as India and China.
End suction pump units are installed in numerous verticals such as food and beverage, marine, metal production, chemicals, and agriculture, due to the constant requirement of pumps to boost pressure and deliver water to various operations. Application of these solutions in various capacities and sizes is governed by several criteria, including viscosity, temperature, specific gravity, pressure, density, and vapor pressure of the working fluid.
Cavitation is the creation of the vapor phase in a liquid when it is exposed to low pressure while maintaining a constant ambient temperature. Vapor bubbles produced within centrifugal pumps due to insufficient liquid able to move toward places of high pressure within them in order to breakdown under sufficient pressure and return to the liquid state. The implosion of these bubbles tears off minute amounts of metal from impeller surfaces, causing low-frequency vibration and noise as well as substantial damage to centrifugal pumps. This has an effect on pump performance, resulting in lower sales and higher replacement costs. As a result, cavitation and dry-run-related problems hamper the growth of the end suction pump market.
Based on pump types, the global end suction pump market is segmented into frame mounted end suction pump, close coupled end suction pump, and lined end suction pump. The frame mounted end suction pump segment is expected to expand at a significant CAGR during the forecast period, as these pumps handle solids & liquids and are utilized across many sectors to increase production. The close coupled end suction pump segment holds a considerable market share during the forecast period, as it costs less to replace them than repairing them. Lined end suction pumps improve the capability and performance of flow of fluid as well as survive in service for long periods of time in harsh applications. These factors are projected to drive the market during the forecast period.
Based on stages, the global end suction pump market is segmented into single stage and multi stage. The single stage pumps segment is expected to expand at a significant CAGR during the forecast period, as single stage pumps are reliable and have low maintenance charges. The multi stage pumps segment holds a considerable market share during the forecast period, since they are widely applied in the industrial sector and can manage huge fluid flow volumes.
Based on applications, the global end suction pump market is segmented into residential, commercial, and industrial. The Residential segment is expected to expand at a significant CAGR during the forecast period, as increase the demand of end suction pump in domestic due to technology advancement like solar pump and 3D printed impellers. The commercial segment holds a considerable market share during the forecast period, due to high efficiency with low power consumption of end suction pump. The increasing requirement to replace old industrial pumps in the pharmaceutical and food and beverage industries is also fueling market expansion which is driving the market during the forecast period.
On the basis of regions, the market is categorized as North America, Europe, Asia Pacific, Latin America, and Middle East & Africa (MEA). The market in North America is anticipated to grow at a significant CAGR during the forecast period, due to technological advancements pertaining to the high performance of pumping systems in the region. The US held a significant share of the global market in 2020, due to rising exploration activities in both offshore and onshore oil & gas industries, which is anticipated to fuel the demand for end suction pumps during the forecast period.
Europe holds a substantial share of the market during the forecast period, due to stringent regulations aimed at reducing water pollution at the domestic level, which is expected to play a key role in increasing the demand for water treatment in the municipal and industrial sectors. This is expected to drive the end suction pump market during the forecast period.
Some frequently asked quetions about this report!
Additional company profiles can be provided on request.
Yes, the report covers various end suction pumps market by residential, commercial, and industrial.
According to this Growth Market Reports, the market from end suction pumps market is likely to register a CAGR of 3.5% during period 2021-2028, with an anticipated valuation of USD 2,306.2 million by the end of the 2028.
In addition to market size (in USD Million) and Company Market Share (in % for base year 2020), other data such as Global End Suction Pump Market: Trends, Global End Suction Pumps: Key Standards & Regulations, Global End Suction Pumps: Technology Landscape, Global Centrifugal Pump Industry: Overview & Trends, Macro-economic factors, and COVID-19 Impact on the end suction pumps market is available in final report.
Factors such as competitive strength and market positioning are key areas considered while selecting top companies to be profiled.
The increasing rate of industrialization and urbanization, as well as the increasing need for energy, are expected to raise the demand for minerals throughout the forecast period, fueling the use of frame end suction pumps and driving the market.
Construction of new water & wastewater treatment facilities and adoption of solar-powered end suction pumps are the major factors propelling the market during the forecast period.
The market is expected to witness sluggish growth with slow increase in terms of demand during 2019-2020 owing to the negative impact of COVID-19 pandemic on the end suction pumps market.
The base year considered for the end suction pumps market report is 2020. The complete analysis period is 2018 to 2028, wherein, 2018 & 2019 are the historic years, and the forecast is provided from 2021 to 2028.
Major Manufactures include Flowserve Corporation, Arroyo Process Equipment, Grundfos Holding A/S, Sulzer Ltd, Franklin Electric Co., Inc., ANDRITZ, Gorman-Rupp Pumps, Apex Fluid Engineering Ltd., OPTIMEX, DESMI A/S, SPP Pumps Limited, Carver Pump Company, NAFFCO, Ruhrpumpen Group, and Gardner Denver.
Some other reports from this category!