According to a recent market study published by Growth Market Research, titled, “Global Turbo Blower Market by Blower Technology, By Bearing Type, By Impeller Type, By Pressure, By End-use Industry, and By Region: Size, Share, Trends and Opportunity Analysis, 2016-2031”, the market was valued at US$   7,087.05 million in 2022 and is anticipated to expand at a growth rate of 4.2% by 2031.

A turbo blower, also known as a turbine blower, uses a high-speed impeller to compress air. Its blades rotate between stationary blades that are attached to the housing on the rotating part. The basic principle behind a turbo blower is the use of a high-speed impeller or rotor that rotates at very high speeds, typically ranging from 10,000 to 30,000 revolutions per minute (RPM), to import kinetic energy to the gas, which is then converted into pressure energy as the gas is forced through the blower’s diffuser or volute. This high-speed rotation of the impeller generates a centrifugal force that pushes the gas radially outward, increasing the gas pressure. The compressed gas is then discharged from the blower at high pressure, ready for use in various industrial processes. There are several generations of turbo blowers, with the most recent technology being airfoil bearing and magnetic bearing turbo blowers.

Get Sample Report @ https://growthmarketreports.com/request-sample/5332

The global Turbo Blower market has been segmented in terms of By Blower Technology, bearing type, Impellers Type, By pressure, and By End-Use Industry. In terms of blower technology, the Global Turbo Blower Market is segmented into Single-Stage and Multi-Stage Blower technology. Based on bearing type, the Market is segmented into Airfoil and Magnetic bearing types. On the basis of impeller type, the market is fragmented into Milled Impellers and Cast Impellers. Based on pressure, the market is divided into up to 15 psi, 15 to 20 psi, and above 20 psi. On the basis of the End-Use Industry, the market is fragmented into Waste Water Treatment, Power Plants, Petrochemicals Industry, Chemical Processing Sector, and Others. Considering regions, the market is divided into North America, Europe, Asia Pacific, Latin America, and the Middle East and Africa.

The COVID-19 pandemic has affected the demand for turbo blowers due to disruptions in the supply chain, the shutdown of manufacturing plants, changes in consumer behavior, and a decrease in economic activities in some parts of the world.  The COVID-19 pandemic had a negative impact on the Global Turbo Blower Market, with market growth dwindling negatively. The pandemic has had a significant impact on the manufacture of Turbo Blower, with disruptions in the supply chain, reduced demand, and changes in the manufacturing process. The pandemic has caused disruptions in the transportation of non-OEM parts, which has led to delays in the production process.

Key Takeaways from the Study

  • Players in the global turbo blower market include Aerzen, APG-Neuros, Atlas Copco AB, Fuji Electric Co., Ltd., Gardner Denver, HAUS Centrifuge Technologies, Howden Group, KAESER KOMPRESSOREN, KTurbo USA, Inc, Sulzer Ltd, Xylem. These players held a major share of the global turbo blower market in 2022.
  • The industrial sector in developing countries is expanding significantly due to foreign direct investments and increased expenditure by the governments of their respective countries. Turbo blowers are extensively utilized in the industrial sector, which is expected to drive the market for turbo blowers during the forecast period.
  • Industries such as food and beverage, pharmaceuticals, electronics, and semiconductors require oil-free compressed air for their operations to maintain product quality and prevent contamination. Turbo blowers provide oil-free, clean, and reliable compressed air, making them a preferred choice in these industries.
  • Based on blower technology, the market is segmented into Single Stage and Multi-Stage blower technology. Single-stage blower technology is simple and less expensive than multi-stage blower technology; however, it has limitations on the maximum pressure ratio that is achieved.
  • Based on bearing type, the market is fragmented into Airfoil bearings and Magnetic Bearings Airfoil bearings are a type of hydrodynamic bearing that uses a thin film of air to support the shaft. They work by creating a cushion of air that lifts and supports the rotating shaft, thus minimizing friction and wear. Airfoil bearings are typically used in high-speed applications where traditional bearings are suitable for use, due to their high friction and heat generation.
  • Based on Impellers, the market is segmented into Milled Impellers and Cast Impellers. Milled impellers are typically made of Milled steel and are designed to be low in cost and maintenance. They are suitable for low-pressure applications and are often used in small-scale industrial or commercial settings.
  • Based on Pressure, the market is segmented into up to 15 psi, 15-20 psi, and Above 20 psi. Turbo blowers are used for low-pressure applications, such as aeration in wastewater treatment or pneumatic conveying of granular materials, and typically operate at pressures up to 15 psi. These blowers typically have low power requirements and are designed to deliver high flow rates at low-pressure differentials.
  • Based on the End-Use Industry, the market is segmented into Waste Water Treatment, Power Plants, Petrochemicals Industry, Chemicals Processing, and Others. Turbo blowers are extensively used in wastewater treatment plants for providing air for the process of aeration, which is used to break down organic matter in the water. Turbo blowers are used in pneumatic conveying systems to transport materials, such as cement, flour, and grain. The blower provides a continuous stream of air or gas to move the material through pipes, which reduces the need for mechanical conveyors. Turbo blowers are used in air separation processes to separate different gases, such as nitrogen, oxygen, and argon.
  • Based on regions, the market is segmented into North America, Europe, Asia Pacific, Latin America, and Middle East & Africa.  an increase in the production of oil & gas and petrochemical industries is driving the demand for turbo blowers. The increase in oil production across GCC countries such as Bahrain, United Arab Emirates (UAE), Saudi Arabia, Qatar, Oman, and Kuwait is boosting the demand for turbo blowers in countries across the Middle East and Africa.

Report Scope

Report Metric

Details

Market Value in 2022

US$ 7,087.05 Million

Market Growth Rate (from 2022 to 2031)

4.2%

Historical Data

2016 & 2021

Base Year

2022

Forecast Period

2023 – 2031

Units Considered

Value (US$ Million)

Market Segments

By Blower Technology, By Bearing Type, By Impeller Type, By Pressure, By End-use Industry, and By Region

Key Companies Profiled

Aerzen, APG-Neuros, Atlas Copco AB, Fuji Electric Co., Ltd., Gardner Denver, HAUS Centrifuge Technologies, Howden Group, KAESER KOMPRESSOREN, KTurbo USA, Inc, Sulzer Ltd, Xylem

Customization Scope

Report customization available on request

Pricing and Purchase Options

Avail of tailor-made purchase options to meet your research requirements.

Target Audience

  • Supply-side: Vendor, Manufacturer, Distributors, Supplier, Retailer.
  • Regulatory Side: Concerned government authorities, and other approved regulatory bodies.